Bulkhead Fitting (Through the kayak deck)

• Requires a 16mm hole to be drilled (correct type and size drill bit available here)
• Supplied with large flat nylon washers to strengthen the area
•  A Silicone breakaway section. This creates the 'weakest link', to release the tubing from the kayak if you swim
• 90 degree elbow for the underside. This will keep the inside tubing close to the hull, and out of the way.
• Straight joiner. This attaches permanently to the 8mm tubing from your PFD, and creates the breakaway section when inserted into the silicone breakaway piece. 

FITTING ADVICE

$20.00